OpenBSD Port Trunking
Материал из Xgu.ru
# ifconfig rl0 up # ifconfig rl1 up # ifconfig trunk0 trunkport rl0 up # ifconfig trunk0 trunkport rl1 up # ifconfig trunk0 trunkproto roundrobin 10.14.15.27 netmask 255.255.255.0 up
Для того чтобы результаты сохранялись после перезагрузки:
# echo "up" > /etc/hostname.rl0 # echo "up" > /etc/hostname.rl1 # echo "trunkproto roundrobin trunkport rl0 trunkport rl1 10.14.15.27 netmask 255.255.255.0" > /etc/hostname.trunk0 # shutdown -r +0
Конфигурация сетевых интерфейсов после этого:
# ifconfig -a
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33208
groups: lo
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
rl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:11:2f:34:7d:a5
trunk: trunkdev trunk0
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet6 fe80::211:2fff:fe34:7da5%rl0 prefixlen 64 scopeid 0x1
rl1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:11:2f:34:7d:a5
trunk: trunkdev trunk0
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet6 fe80::2c0:26ff:feac:5c63%rl1 prefixlen 64 scopeid 0x2
enc0: flags=0<> mtu 1536
trunk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:11:2f:34:7d:a5
trunk: trunkproto roundrobin
trunkport rl1 active
trunkport rl0 master,active
groups: trunk egress
media: Ethernet autoselect
status: active
inet6 fe80::211:2fff:fe34:7da5%trunk0 prefixlen 64 scopeid 0x5
inet 10.14.15.27 netmask 0xffffff00 broadcast 10.14.15.255
Подробнее:
