man/orig/csup

Материал из Xgu.ru

Перейти к: навигация, поиск

Не указан параметр (1)


CSUP(1) FreeBSD General Commands Manual CSUP(1)

Содержание

[править] NAME

    csup — network distribution package for CVS repositories

[править] SYNOPSIS

    csup [-146aksvzZ] [-A addr] [-b base] [-c collDir] [-d delLimit]
         [-h host] [-i pattern] [-l lockfile] [-L verbosity] [-p port]
         [-r maxRetries] supfile

[править] DESCRIPTION

    csup is a software package for updating collections of files across a
    network.  It is a rewrite of the CVSup software in C.  This manual page
    describes the usage of the csup client program.
    Unlike more traditional network distribution packages, such as rdist and
    sup, csup has specific optimizations for distributing CVS repositories.
    csup takes advantage of the properties of CVS repositories and the files
    they contain (in particular, RCS files), enabling it to perform updates
    much faster than traditional systems.
    csup is a general-purpose network file updating package.  It is extremely
    fast, even for collections of files which have nothing to do with CVS or
    RCS.

[править] OPTIONS

    The client program csup requires at least a single argument, supfile.  It
    names a file describing one or more collections of files to be trans‐
    ferred and/or updated from the server.  The supfile has a format similar
    to the corresponding file used by sup.  In most cases, csup can use
    existing sup supfiles.
    The following options are supported by csup:
    -1          Disables automatic retries when transient failures occur.
                Without this option, a transient failure such as a dropped
                network connection causes csup to retry repeatedly, using
                randomized exponential backoff to space the retries.  This
                option is equivalent to -r 0.
    -4          Forces csup to use IPv4 addresses only.
    -6          Forces csup to use IPv6 addresses only.
    -a          Requires the server to authenticate itself (prove its iden‐
                tity) to the client.  If authentication of the server fails,
                the update is canceled.  See AUTHENTICATION, below.
    -A addr     Specifies a local address to bind to when connecting to the
                server.  The local address might be a hostname or a numeric
                host address string consisting of a dotted decimal IPv4
                address or an IPv6 address.  This may be useful on hosts
                which have multiple IP addresses.
    -b base     Specifies the base directory under which csup will maintain
                its bookkeeping files, overriding any base specifications in
                the supfile.
    -c collDir  Specifies the subdirectory of base where the information
                about the collections is maintained.  The default is sup.
    -d delLimit
                Specifies the maximum number of files that may be deleted in
                a single update run.  Any attempt to exceed the limit results
                in a fatal error.  This can provide some protection against
                temporary configuration mistakes on the server.  The default
                limit is infinity.
    -h host     Specifies the server host to contact, overriding any host
                specifications in the supfile.
    -i pattern  Causes csup to include only files and directories matching
                pattern in the update.  If a directory matches the pattern,
                then the entire subtree rooted at the directory is included.
                If this option is specified multiple times, the patterns are
                combined using the ‘or’ operation.  If no -i options are
                given, the default is to update all files in each collection.
                The pattern is a standard file name pattern.  It is inter‐
                preted relative to the collection's prefix directory.  Slash
                characters are matched only by explicit slashes in the pat‐
                tern.  Leading periods in file name are not treated spe‐
                cially.
    -k          Causes csup to keep the temporary copies of any incorrectly
                edited files, in the event of checksum mismatches.  This
                option is for debugging, to help determine why the files were
                edited incorrectly.  Regardless of whether this option is
                specified, the permanent versions of faulty files are
                replaced with correct versions obtained by transferring the
                files in their entirety.  Such transfers are called fixups.
    -l lockfile
                Creates and locks the lockfile while the update is in
                progress.  If lockfile is already locked, csup fails without
                performing automatic retries.  This option is useful when
                csup is executed periodically from cron.  It prevents a job
                from interfering with an earlier job that is perhaps taking
                extra long because of network problems.
                The process-ID is written to the lock file in text form when
                the lock is successfully acquired.  Upon termination of the
                update, the lock file is removed.
    -L verbosity
                Sets the verbosity level for output.  A level of 0 causes
                csup to be completely silent unless errors occur.  A level of
                1 (the default) causes each updated file to be listed.  A
                level of 2 provides more detailed information about the
                updates performed on each file.  All messages are directed to
                the standard output.
    -p port     Sets the TCP port to which csup attempts to connect on the
                server host.  The default port is 5999.
    -r maxRetries
                Limits the number of automatic retries that will be attempted
                when transient errors such as lost network connections are
                encountered.  By default, csup will retry indefinitely until
                an update is successfully completed.  The retries are spaced
                using randomized exponential backoff.  Note that -r 0 is
                equivalent to the -1 option.
    -s          Suppresses the check of each client file's status against
                what is recorded in the list file.  Instead, the list file is
                assumed to be accurate.  This option greatly reduces the
                amount of disk activity and results in faster updates with
                less load on the client host.  However it should only be used
                if client's files are never modified locally in any way.
                Mirror sites may find this option beneficial to reduce the
                disk load on their systems.  For safety, even mirror sites
                should run csup occasionally (perhaps once a day) without the
                -s option.
                Without the -s option, csup performs a stat(2) call on each
                file and verifies that its attributes match those recorded in
                the list file.  This ensures that any file changes made out‐
                side of csup are detected and corrected.
                If the -s option is used when one or more files have been
                modified locally, the results are undefined.  Local file dam‐
                age may remain uncorrected, updates may be missed, or csup
                may abort prematurely.
    -v          Prints the version number and exits, without contacting the
                server.
    -z          Enables compression for all collections, as if the compress
                keyword were added to every collection in the supfile.
    -Z          Disables compression for all collections, as if the compress
                keyword were removed from every collection in the supfile.
    The supfile is a text file which specifies the file collections to be
    updated.  Comments begin with ‘#’ and extend to the end of the line.
    Lines that are empty except for comments and white space are ignored.
    Each remaining line begins with the name of a server-defined collection
    of files.  Following the collection name on the line are zero or more
    keywords or keyword=value pairs.
    Default settings may be specified in lines whose collection name is
    *default.  Such defaults will apply to subsequent lines in the supfile.
    Multiple *default lines may be present.  New values augment or override
    any defaults specified earlier in the supfile.  Values specified explic‐
    itly for a collection override any default values.
    The most commonly used keywords are:
    release=releaseName
                This specifies the release of the files within a collection.
                Like collection names, release names are defined by the
                server configuration files.  Usually there is only one
                release in each collection, but there may be any number.
                Collections which come from a CVS repository often use
                release=cvs by convention.  Non-CVS collections convention‐
                ally use release=current.
    base=base   This specifies a directory under which csup will maintain its
                bookkeeping files, describing the state of each collection on
                the client machine.  The base directory must already exist;
                csup will not create it.  The default base directory is
                /usr/local/etc/csup.
    prefix=prefix
                This is the directory under which updated files will be
                placed.  By default, it is the same as base.  If it is not an
                absolute pathname, it is interpreted relative to base.  The
                prefix directory must already exist; csup will not create it.
                As a special case, if prefix is a symbolic link pointing to a
                nonexistent file named ‘SKIP’, then csup will skip the col‐
                lection.  The parameters associated with the collection are
                still checked for validity, but none of its files will be
                updated.  This feature allows a site to use a standard
                supfile on several machines, yet control which collections
                get updated on a per-machine basis.
    host=hostname
                This specifies the server machine from which all files will
                be taken.  csup requires that all collections in a single run
                come from the same host.  If you wish to update collections
                from several different hosts, you must run csup several
                times.
    delete      The presence of this keyword gives csup permission to delete
                files.  If it is missing, no files will be deleted.
                The presence of the delete keyword puts csup into so-called
                exact mode.  In exact mode, csup does its best to make the
                client's files correspond to those on the server.  This
                includes deleting individual deltas and symbolic tags from
                RCS files, as well as deleting entire files.  In exact mode,
                csup verifies every edited file with a checksum, to ensure
                that the edits have produced a file identical to the master
                copy on the server.  If the checksum test fails for a file,
                then csup falls back upon transferring the entire file.
                In general, csup deletes only files which are known to the
                server.  Extra files present in the client's tree are left
                alone, even in exact mode.  More precisely, csup is willing
                to delete two classes of files:
                ·   Files that were previously created or updated by csup
                    itself.
                ·   Checked-out versions of files which are marked as dead on
                    the server.
    use-rel-suffix
                Causes csup to append a suffix constructed from the release
                and tag to the name of each list file that it maintains.  See
                THE LIST FILE for details.
    compress    This enables compression of all data sent across the network.
                Compression is quite effective, normally eliminating 65% to
                75% of the bytes that would otherwise need to be transferred.
                However, it is costly in terms of CPU time on both the client
                and the server.  On local area networks, compression is gen‐
                erally counter-productive; it actually slows down file
                updates.  On links with speeds of 56K bits/second or less,
                compression is almost always beneficial.  For network links
                with speeds between these two extremes, let experimentation
                be your guide.
                The -z command line option enables the compress keyword for
                all collections, regardless of what is specified in the sup‐
                file.  Likewise, the -Z command line option disables the
                compress option for all collections.  csup uses a looser
                checksum for RCS files, which ignores harmless differences in
                white space.  Different versions of CVS and RCS produce a
                variety of differences in white space for the same RCS files.
                Thus the strict checksum can report spurious mismatches for
                files which are logically identical.  This can lead to numer‐
                ous unneeded “fixups”, and thus to slow updates.
    umask=n     Causes csup to use a umask value of n (an octal number) when
                updating the files in the collection.  This option is ignored
                if preserve is specified.
    Some additional, more specialized keywords are described below.  Unrecog‐
    nized keywords are silently ignored for backward compatibility with sup.

[править] CVS MODE

    CVSup supports two primary modes of operation.  They are called CVS mode
    and checkout mode.
    In CVS mode, the client receives copies of the actual RCS files making up
    the master CVS repository.  CVS mode is the default mode of operation.
    It is appropriate when the user wishes to maintain a full copy of the CVS
    repository on the client machine.
    CVS mode is also appropriate for file collections which are not based
    upon a CVS repository.  The files are simply transferred verbatim, with‐
    out interpretation.

[править] CHECKOUT MODE

    In checkout mode, the client receives specific revisions of files,
    checked out directly from the server's CVS repository.  Checkout mode
    allows the client to receive any version from the repository, without
    requiring any extra disk space on the server for storing multiple ver‐
    sions in checked-out form.  Checkout mode provides much flexibility
    beyond that basic functionality, however.  The client can specify any CVS
    symbolic tag, or any date, or both, and csup will provide the correspond‐
    ing checked-out versions of the files in the repository.
    Checkout mode is selected on a per-collection basis, by the presence of
    one or both of the following keywords in the supfile:
    tag=tagname
                This specifies a symbolic tag that should be used to select
                the revisions that are checked out from the CVS repository.
                The tag may refer to either a branch or a specific revision.
                It must be symbolic; numeric revision numbers are not sup‐
                ported.
                For the FreeBSD source repository, the most commonly used
                tags will be:
                RELENG_6  The ‘stable’ branch.
                .         The main branch (the ‘current’ release).  This is
                          the default, if only the date keyword is given.
    date=[cc]yy.mm.dd.hh.mm.ss
                This specifies a date that should be used to select the revi‐
                sions that are checked out from the CVS repository.  The
                client will receive the revisions that were in effect at the
                specified date and time.
                At present, the date format is inflexible.  All 17 or 19
                characters must be specified, exactly as shown.  For the
                years 2000 and beyond, specify the century cc.  For earlier
                years, specify only the last two digits yy.  Dates and times
                are considered to be GMT.  The default date is ‘.’, which
                means “as late as possible”.
    To enable checkout mode, you must specify at least one of these keywords.
    If both are missing, csup defaults to CVS mode.
    If both a branch tag and a date are specified, then the revisions on the
    given branch, as of the given date, will be checked out.  It is permit‐
    ted, but not particularly useful, to specify a date with a specific
    release tag.
    In checkout mode, the tag and/or date may be changed between updates.
    For example, suppose that a collection has been transferred using the
    specification ‘tag=.’.  The user could later change the specification to
    ‘tag=RELENG_3’.  This would cause csup to edit the checked-out files in
    such a way as to transform them from the ‘current’ versions to the
    ‘stable’ versions.  In general, csup is willing to transform any tag/date
    combination into any other tag/date combination, by applying the inter‐
    vening RCS deltas to the existing files.
    When transforming a collection of checked-out files from one tag to
    another, it is important to specify the list keyword in the supfile, to
    ensure that the same list file is used both before and after the trans‐
    formation.  The list file is described in THE LIST FILE, below.

[править] THE LIST FILE

    For efficiency, csup maintains a bookkeeping file for each collection,
    called the list file.  The list file contains information about which
    files and revisions the client currently possesses.  It also contains
    information used for verifying that the list file is consistent with the
    actual files in the client's tree.
    The list file is not strictly necessary.  If it is deleted, or becomes
    inconsistent with the actual client files, csup falls back upon a less
    efficient method of identifying the client's files and performing its
    updates.  Depending on csup's mode of operation, the fallback method
    employs time stamps, checksums, or analysis of RCS files.
    Because the list file is not essential, csup is able to “adopt” an exist‐
    ing file tree acquired by FTP or from a CD-ROM.  csup identifies the
    client's versions of the files, updates them as necessary, and creates a
    list file for future use.  Adopting a foreign file tree is not as fast as
    performing a normal update.  It also produces a heavier load on the
    server.
    The list file is stored in a collection-specific directory; see FILES for
    details.  Its name always begins with ‘checkouts’.  If the keyword
    use-rel-suffix is specified in the supfile, a suffix, formed from the
    release and tag, is appended to the name.  The default suffix can be
    overridden by specifying an explicit suffix in the supfile:
    list=suffix
                This specifies a suffix for the name of the list file.  A
                leading dot is provided automatically.  For example,
                ‘list=stable’ would produce a list file named
                checkouts.stable, regardless of the release, tag, or
                use-rel-suffix keyword.

[править] REFUSE FILES

    The user can specify sets of files that he does not wish to receive.  The
    files are specified as file name patterns in so-called refuse files.  The
    patterns are separated by whitespace, and multiple patterns are permitted
    on each line.  Files and directories matching the patterns are neither
    updated nor deleted; they are simply ignored.
    There is currently no provision for comments in refuse files.
    The patterns are similar to those of sh(1), except that there is no spe‐
    cial treatment for slashes or for filenames that begin with a period.
    For example, the pattern ‘*.c’ will match any file name ending with ‘.c’
    including those in subdirectories, such as ‘foo/bar/lam.c’.  All patterns
    are interpreted relative to the collection's prefix directory.
    If the files are coming from a CVS repository, as is usually the case,
    then they will be RCS files. These have a ‘,v’ suffix which must be taken
    into account in the patterns. For example, the FreeBSD documentation
    files are in a sub-directory of base called ‘doc’.  If ‘Makefile’ from
    that directory is not required then the line
          doc/Makefile
    will not work because the file on the server is called ‘Makefile,v.’ A
    better solution would be
          doc/Makefile*
    which will match whether ‘Makefile’ is an RCS file or not.
    As another example, to receive the FreeBSD documentation files without
    the Japanese, Russian, and Chinese translations, create a refuse file
    containing the following lines:
          doc/ja*
          doc/ru*
          doc/zh*
    As many as three refuse files are examined for each supfile line.  There
    can be a global refuse file named base/collDir/refuse which applies to
    all collections and releases.  There can be a per-collection refuse file
    named base/collDir/collection/refuse which applies to a specific collec‐
    tion.  Finally, there can be a per-release and tag refuse file which
    applies only to a given release/tag combination within a collection.  The
    name of the latter is formed by suffixing the name of the per-collection
    refuse file in the same manner as described above for the list file.
    None of the refuse files are required to exist.
    csup has a built-in default value of /usr/local/etc/cvsup for base and
    sup for collDir but it is possible to override both of these. The value
    of base can be changed using the -b option or a base=pathname entry in
    the supfile.  (If both are used the -b option will override the supfile
    entry.)  The value of collDir can only be changed with the -c option;
    there is no supfile command to change it.
    As an example, suppose that the base and collDir both have their default
    values, and that the collection and release are ‘src-all’ and ‘cvs’,
    respectively.  Assume further that checkout mode is being used with
    ‘tag=RELENG_3’.  The three possible refuse files would then be named:
          /usr/local/etc/cvsup/sup/refuse
          /usr/local/etc/cvsup/sup/src-all/refuse
          /usr/local/etc/cvsup/sup/src-all/refuse.cvs:RELENG_3
    If the supfile includes the command base=/foo the refuse files would be:
          /foo/sup/refuse
          /foo/sup/src-all/refuse
          /foo/sup/src-all/refuse.cvs:RELENG_3
    If -b /bar is used (even with base=/foo in the supfile):
          /bar/sup/refuse
          /bar/sup/src-all/refuse
          /bar/sup/src-all/refuse.cvs:RELENG_3
    and with -c stool as well:
          /bar/stool/refuse
          /bar/stool/src-all/refuse
          /bar/stool/src-all/refuse.cvs:RELENG_3

[править] AUTHENTICATION

    csup implements an optional authentication mechanism which can be used by
    the client and server to verify each other's identities.  Public CVSup
    servers normally do not enable authentication.  csup users may ignore
    this section unless they have been informed that authentication is
    required by the administrator of their server.
    The authentication subsystem uses a challenge-response protocol which is
    immune to packet sniffing and replay attacks.  No passwords are sent over
    the network in either direction.  Both the client and the server can
    independently verify the identities of each other.
    The file $HOME/.csup/auth holds the information used for authentication.
    This file contains a record for each server that the client is allowed to
    access.  Each record occupies one line in the file.  Lines beginning with
    ‘#’ are ignored, as are lines containing only white space.  White space
    is significant everywhere else in the file.  Fields are separated by ‘:’
    characters.
    Each record of the file has the following form:
          serverName:clientName:password:comment
    All fields must be present even if some of them are empty.  ServerName is
    the name of the server to which the record applies.  By convention, it is
    the canonical fully-qualified domain name of the server, e.g.,
    ‘CVSup177.FreeBSD.ORG’.  This must agree with the server's own idea of
    its name.  The name is case-insensitive.
    ClientName is the name the client uses to gain access to the server.  By
    convention, e-mail addresses are used for all client names, e.g.,
    ‘BillyJoe@FreeBSD.org’.  Client names are case-insensitive.
    Password is a secret string of characters that the client uses to prove
    its identity.  It may not contain any ‘:’ or newline characters.
    Comment may contain any additional information to identify the record.
    It is not interpreted by the program.
    To set up authentication for a given server, one must perform the follow‐
    ing steps:
    1.   Obtain the official serverName from the administrator of the server
         or from some other source.
    2.   Choose an appropriate clientName.  It should be in the form of a
         valid e-mail address, to make it easy for the server administrator
         to contact the user if necessary.
    3.   Choose an arbitrary secret password.
    4.   Run the cpasswd utility, and type in the password when prompted for
         it.  The utility will print out a line to send to the server admin‐
         istrator, and instruct you how to modify your $HOME/.csup/auth file.
         You should use a secure channel to send the line to the server
         administrator.
    Since $HOME/.csup/auth contains passwords, you should ensure that it is
    not readable by anyone except yourself.
    Authentication works independently in both directions.  The server admin‐
    istrator controls whether you must prove your identity.  You control
    whether to check the server's identity, by means of the -a command line
    option.

[править] csup AND FIREWALLS

    In its default mode, csup will work through any firewall which permits
    outbound connections to port 5999 of the server host.

[править] USING csup WITH SOCKS

    csup can be used through a SOCKS proxy server with the standard runsocks
    command.  Your csup executable needs to be dynamically-linked with the
    system libraries for runsocks to work properly.

[править] USING ssh PORT FORWARDING

    As an alternative to SOCKS, a user behind a firewall can penetrate it
    with the TCP port forwarding provided by the Secure Shell package ssh.
    The user must have a login account on the CVSup server host in order to
    do this.  The procedure is as follows:
    1.   Establish a connection to the server host with ssh, like this:
         ssh -f -x -L 5999:localhost:5999 serverhost sleep 60
         Replace serverhost with the hostname of the CVSup server, but type
         ‘localhost’ literally.  This sets up the required port forwarding.
         You must start csup before the 60-second sleep finishes.  Once the
         update has begun, ssh will keep the forwarded channels open as long
         as they are needed.
    2.   Run csup on the local host, including the arguments ‘-h localhost’
         on the command line.

[править] FILES

    /usr/local/etc/cvsup              Default base directory.
    sup                               Default collDir subdirectory.
    base/collDir/collection/checkouts*
                                      List files.

[править] SEE ALSO

    cpasswd(1), cvs(1), rcsintro(1), ssh(1).

[править] AUTHORS

    Maxime Henrion <mux@FreeBSD.org> is the author of csup, the rewrite of
    CVSup in C.  John Polstra <jdp@polstra.com> is the author of CVSup.

[править] LEGALITIES

    CVSup is a registered trademark of John D. Polstra.
    csup is released under a 2-clauses BSD license.

[править] BUGS

    An RCS file is not recognized as such unless its name ends with ‘,v’.
    Any directory named ‘Attic’ is assumed to be a CVS Attic, and is treated
    specially.

FreeBSD February 1, 2006 FreeBSD

Источник — «http://5.9.243.178/wiki/man/orig/csup»