man/orig/ngctl
Материал из Xgu.ru
Не указан параметр (1)
NGCTL(8) FreeBSD System Manager's Manual NGCTL(8)
NAME
ngctl -- netgraph control utility
SYNOPSIS
ngctl [-d] [-f filename] [-n nodename] [command ...]
DESCRIPTION
The ngctl utility creates a new netgraph node of type socket which can be
used to issue netgraph commands. If no -f flag is given, no command is
supplied on the command line, and standard input is a tty, ngctl will
enter interactive mode. Otherwise ngctl will execute the supplied com-
mand(s) and exit immediately.
Nodes can be created, removed, joined together, etc. ASCII formatted
control messages can be sent to any node if that node supports
binary/ASCII control message conversion.
In interactive mode, ngctl will display any control messages and data
packets received by the socket node. In the case of control messages,
the message arguments are displayed in ASCII form if the originating node
supports conversion.
The options are as follows:
-f nodeinfo
Read commands from the named file. A single dash represents the
standard input. Blank lines and lines starting with a ``# are
ignored.
-n nodename
Assign nodename to the newly created netgraph node. The default
name is ngctlXXX where XXX is the process ID number.
-d Increase the debugging verbosity level.
COMMANDS
The currently supported commands in ngctl are:
config get or set configuration of node at <path>
connect Connects hook <peerhook> of the node at <relpath> to <hook>
debug Get/set debugging verbosity level
dot Produce a GraphViz (.dot) of the entire netgraph.
help Show command summary or get more help on a specific command
list Show information about all nodes
mkpeer Create and connect a new node to the node at "path"
msg Send a netgraph control message to the node at "path"
name Assign name <name> to the node at <path>
read Read and execute commands from a file
rmhook Disconnect hook "hook" of the node at "path"
show Show information about the node at <path>
shutdown Shutdown the node at <path>
status Get human readable status information from the node at <path>
types Show information about all installed node types
write Send a data packet down the hook named by "hook".
quit Exit program
Some commands have aliases, e.g., ``ls is the same as ``list. The
``help command displays the available commands, their usage and
aliases, and a brief description.
EXIT STATUS
The ngctl utility exits 0 on success, and >0 if an error occurs.
SEE ALSO
netgraph(3), netgraph(4), nghook(8)
HISTORY
The netgraph system was designed and first implemented at Whistle Commu-
nications, Inc. in a version of FreeBSD 2.2 customized for the Whistle
InterJet.
AUTHORS
Archie Cobbs <archie@whistle.com>
FreeBSD 9.0 January 19, 1999 FreeBSD 9.0
